Rocktron Patchmate Loop 8 Floor Manuel d'utilisateur télécharger pdf (Page 28)

Preset Dump

MIDI PRESET DUMP PROCEDURE:

To DUMP or copy presets from your PatchMate LOOP 8 Floor to another PatchMate LOOP 8 Floor,

rst connect the two via MIDI OUT of the sending PatchMate LOOP 8 Floor to the MIDI IN of the

receiving PatchMate LOOP 8 Floor.

1. Turn the PatchMate LOOP 8 Floor “ON”, within the rst 3 seconds press and release the STORE but-

ton. The Store Button will begin “ashing”. Note: this procedure must be done within 3 seconds of the

PatchMate LOOP 8 Floor being turned “ON If you forgot just turn the Patchmate Loop 8 off

for 5 seconds and try again.

2. Press SWITCH 5 (PRESET DUMP ), the LED above it will be lit.

3 PRESS and RELEASE the STORE BUTTON to execute a dump of all user preset data via MIDI. The

STORE BUTTON will blink rapidly during this process.

After the PatchMate LOOP 8 Floor has nished the Midi Preset Dump process the PROGRAMMING

MODE will be canceled and the PatchMate LOOP 8 Floor will return to the current PRESET.

1 2 ... 23 24 25 26 27 28 29 30 31 32

Pas de commentaire

Rocktron Patchmate Loop 8 Floor Manuel d'utilisateur Page 28